Novinka

7.3inch 6-Color E-Paper Display Module, E-Ink Display, Low Power Consumption, 800×480 pixels, SPI (WS-27863)

7.3inch 6-Color E-Paper Display Module, E-Ink Display, Low Power Consumption, 800×480 pixels, SPI (WS-27863)

Name: 7.3inch 6-Color E-Paper Display Module, E-Ink Display, Low Power Consumption, 800×480 pixels, SPI (WS-27863)
Brand: Waveshare Electronics
SKU: WS-27863
Price: 87.48 EUR
Availability: PreOrder

Kód WS-27863

87,48 €

72.90 € bez DPH

Popis
Detaily produktu

7.3inch 6-Color E-Paper Display Module, E-Ink Display, Low Power Consumption, 800×480 pixels, SPI (WS-27863)

7.3inch 6-Color E-Paper Display Module, E-Ink Display, Low Power Consumption, 800×480 Pixels, SPI Communication

7.3″ 6-Color E-Paper Display

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

7.3inch 6-Color E-Paper Display Module, front view

Note: the e-Paper Driver HAT and accessories are optional, please refer to the Package Content for detailed part list

- Size7.3"
- Resolution800 × 480
- Viewing Angle>170°
- Display Color6-Color
- Grey Scale2

CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective

Version Options

7.3inch e-Paper (E)
raw display, without driver board

7.3inch e-Paper HAT (E)
with e-Paper Driver HAT

Features At A Glance

Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Optional for e-Paper Driver HAT:
- With standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards/Jetson Nano
- Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE	Raw display: 3.3V	DISPLAY COLOR	6-Color
OPERATING VOLTAGE	e-Paper Driver HAT: 3.3V/5V	DISPLAY COLOR	6-Color
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
DISPLAY DIMENSIONS	170.20 × 111.20 × 0.91mm	FULL REFRESH TIME	12s
DISPLAY AREA	160 × 96mm	REFRESH POWER	<70mW(typ.)
DOT PITCH	0.2 × 0.2mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	800 × 480 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Optional For E-Paper Driver HAT

Standard Raspberry Pi 40PIN GPIO Header, Compatible With Raspberry Pi Series Boards / Jetson Nano

7.3inch 6-Color E-Paper Display Module, connecting with Raspberry Pi boards and Jetson Nano

* for reference only, the controller boards above are NOT included.

Onboard SPI Control Interface
On E-Paper Driver HAT

For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

e-Paper Driver HAT front view, interface introduction

VCC	3.3V/5V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data / Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output