Novinka

5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, SPI Interface (WS-27845)

5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, SPI Interface (WS-27845)

Name: 5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, SPI Interface (WS-27845)
Brand: Waveshare Electronics
SKU: WS-27845
Price: 21.42 EUR
Availability: PreOrder

Kód WS-27845

21,42 €

17.85 € bez DPH

Popis
Detaily produktu

5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, SPI Interface (WS-27845)

5.79inch E-Paper Display (G), E-Ink Display, 792x272, Red/Yellow/Black/White, SPI Interface

5.79″ E-Paper (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

5.79inch e-Paper display (G), front view

Note: the driver board is optional, please refer to the Package Content for detailed part list

- Size5.79″
- Resolution792×272
- Viewing Angle>170°
- Display ColorRed/Yellow/Black/White
- Grey Scale2

CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective

Version Options

5.79inch e-Paper (G)
raw display, without driver board

5.79inch e-Paper Module (G)
with driver board

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)
Optional for e-Paper driver board:
- Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

OPERATING VOLTAGE	Raw display: 3.3V	DISPLAY COLOR	Red/Yellow/Black/White
OPERATING VOLTAGE	with driver board: 3.3V/5V	DISPLAY COLOR	Red/Yellow/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	Raw display: 150.92 × 56.94 × 1.00mm	FULL REFRESH TIME	21s
OUTLINE DIMENSIONS	with driver board: 152.50 × 58.50mm	FULL REFRESH TIME	21s
DISPLAY SIZE	139.00 × 47.74mm	REFRESH POWER	<30mW
DOT PITCH	0.1755 × 0.1755mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	792 × 272 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Optional For E-Paper Driver Board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi/Jetson Series/Arduino/STM32

5.79inch e-Paper display (G) with driver board, onboard SPI control interface

PWR	Power on/off control
BUSY	Busy status output pin
RST	External reset, low active
DC	Data/Command selection (high for data, low for command)
CS	SPI chip selection, low active
CLK	SPI SCK pin
DIN	SPI MOSI pin
GND	Ground
VCC	Power (3.3V / 5V input)

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Usage Example

Connecting With Raspberry Pi 5

* for reference only, the Raspberry Pi 5 is NOT included.

Supported Driver Boards For Raw Display

	Universal e-Paper Raw Panel Driver HAT e-Paper Driver HAT	Click here to purchase
	Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless e-Paper ESP32 Driver Board	Click here to purchase
	Universal e-Paper Raw Panel Driver Board, ESP8266 WiFi Wireless e-Paper ESP8266 Driver Board	Click here to purchase
	Universal e-Paper Raw Panel Driver Shield for Arduino / NUCLEO e-Paper Shield	Click here to purchase