RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
13.3inch e-Paper e-Ink Display HAT For Raspberry Pi, 1600×1200, Black / White, 16 Grey Scales, USB / SPI / I80 (WS-15853)
WS-15853
402,06 €
326.88 € bez DPH
13.3inch e-Paper e-Ink Display HAT For Raspberry Pi, 1600×1200, Black / White, 16 Grey Scales, USB / SPI / I80 (WS-15853)
13.3inch e-Paper e-Ink Display HAT For Raspberry Pi, 1600×1200, Black / White, 16 Grey Scales, USB / SPI / I80 (WS-15853)
13.3inch e-Paper E-Ink Display HAT for Raspberry Pi, 1600×1200 pixels, Black / White, 2-16 Grey Scales, USB/SPI/I80
13.3" e-Paper HAT for Raspberry Pi
partial refresh support, low power, wide viewing angle, paper-like effect
Ideal for e-reader, eink monitor, industrial instruments...
- Size
13.3" - Resolution
1600×1200 - Viewing Angle
>170° - Display Color
Black and White - Grey Scale
2-16 (1-4 bit)
- Size
- Communication
USB/SPI/I80 - Display Panel
E-paper - Experience
Paper-like - Environment
Ambient Light Required - Display Type
Passively Reflective - Refreshing
Partial Refresh Support
Features at a glance
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc.
- Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
| operating voltage | 5V | display color | black, white |
|---|---|---|---|
| interface | USB/SPI/I80 | grey scale | 2-16 (1-4 bit) |
| outline dimensions | 285.80 × 213.65mm | full refresh time | <1s |
| display size | 270.40 × 202.80mm | refresh power | 0.77W (typ.) |
| dot pitch | 0.169 × 0.169mm | standby power | 0.5W (typ.) |
| resolution | 1600 × 1200 pixels | viewing angle | >170° |
Advantages of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Standard Raspberry Pi 40PIN GPIO header
compatible with Raspberry Pi series boards
Raspberry Pi in the photo is NOT included.
Onboard USB/SPI/I80 control interface
for use with controller boards like Raspberry Pi/STM32
| SPI pinout | |
|---|---|
| 5V | Power, 5V input |
| GND | Ground |
| MISO | SPI MISO pin |
| MOSI | SPI MOSI pin |
| SCK | SPI SCK pin |
| CS | SPI chip selection, low active |
| RST | External reset, low active |
| HRDY | Busy status output, low active |
Application examples
Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...
Outline dimensions
Balenie Obsahuje / Package Content
- 13.3inch e-Paper x1
- e-Paper IT8951 Driver HAT x1
- 13.3inch e-Paper Adapter x1
- 33PIN FFC (same side contact) x1
- USB type A plug to micro B plug cable x1
- PH2.0 20cm 8Pin x1
- RPi screws pack (2pcs) x1
WS-15853
Špecifické referencie
13.3inch e-Paper e-Ink Display HAT For Raspberry Pi, 1600×1200, Black / White, 16 Grey Scales, USB / SPI / I80 (WS-15853)
13.3inch e-Paper e-Ink Display HAT For Raspberry Pi, 1600×1200, Black / White, 16 Grey Scales, USB / SPI / I80 (WS-15853)
402,06 €
326.88 € bez DPH