• Novinka
    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)
    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)
    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)
    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)

    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)

    WS-28259
    14,28 €

    11.90 € bez DPH

    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)

    Množstvo:
    OUT OF STOCK

    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)

    3.52inch e-Paper display (B), e-ink display, 360x240, Red/Black/White, SPI Interface

    3.52″ e-Paper (B)

    low power, wide viewing angle, paper-like effect without electricity

    Ideal for price tags, shelf labels, industrial instruments...

     3.52inch e-Paper display (B), front view
    Note: the driver board is optional, please refer to the Package Content for detailed part list


      • SizeDimension.png3.52″
      • ResolutionResolution.png360×240
      • Viewing AngleViewing_angle.png>170°
      • Display ColorDisplay-RBW.pngRed/Black/White
      • Grey ScaleGray-scale-2.png2
    • CommunicationSPI.pngSPI
    • Display Panele-Paper.pngE-paper
    • ExperiencePaper.pngPaper-like
    • EnvironmentBulb.pngAmbient Light Required
    • Display TypeReflective.pngPassively Reflective
    Version Options
    3.52inch e-Paper (B)

    3.52inch e-Paper (B)
    raw display, without driver board

     
    3.52inch e-Paper HAT (B)

    3.52inch e-Paper HAT (B)
    with driver board


    Features at a glance
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Series / RDK X3 / Arduino / STM32)
    • Optional for e-Paper driver board:
      • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3
      • Adapting SPI interface for connecting with controller boards like Arduino / STM32, etc.
      • Onboard voltage translator, compatible with 3.3V / 5V MCUs

    Specifications
    operating voltage Raw display: 3.3V display color Red/Black/White
    with driver board: 3.3V/5V
    interface 3-wire SPI, 4-wire SPI grey scale 2
    outline dimensions Raw display: 84.70 × 54.41 × 0.85 (mm) full refresh time 16s
    with driver board: 86.50 x 57.00 (mm)
    display size 74.51 × 49.67 (mm) refresh power <25mW
    DOT PITCH 0.207 × 0.207 (mm) standby current <0.01uA (almost none)
    RESOLUTION 360 × 240 pixels viewing angle >170°
    Advantages of EINK

    E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
    E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.


    Standard Raspberry Pi 40PIN GPIO Header

    Similar to the size of Raspberry Pi, Compatible With the size of Raspberry Pi 5 / 4B / 3B / 3B+

    3.52inch e-Paper display (B) with driver board, onboard standard Raspberry Pi 40PIN GPIO header

    * for reference only, the Raspberry Pi in the picture is NOT included.


    Optional for e-Paper driver board

    Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

    3.52inch e-Paper display (B) with driver board, onboard SPI control interface
    VCC Power (3.3V / 5V input)
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output pin

    Onboard Voltage Translator

    Compatible With 3.3V / 5V MCUs

    3.52inch e-Paper display (B) with driver board, onboard voltage translator

    supported driver boards for raw display

    To test and compare the raw display easily, it is recommended to purchase the following solutions:

    e-Paper-Driver-HAT-intro_160.jpg Universal e-Paper Raw Panel Driver HAT
    e-Paper Driver HAT    		 Click here to purchase
    e-Paper-ESP32-Driver-Board-intro_160.jpg Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless
    e-Paper ESP32 Driver Board    		 Click here to purchase
    e-Paper-ESP8266-Driver-Board-intro2_160.jpg Universal e-Paper Raw Panel Driver Board, ESP8266 WiFi Wireless
    e-Paper ESP8266 Driver Board    		 Click here to purchase
    e-Paper-Shield-intro_160.jpg Universal e-Paper Raw Panel Driver Shield for Arduino / NUCLEO
    e-Paper Shield    		 Click here to purchase

    Application examples

    Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...


    Outline dimensions

    3.52inch e-Paper (B)

     3.52inch e-Paper display (B), outline dimensions 

    3.52inch e-Paper HAT (B)

     3.52inch e-Paper display (B) and driver board, outline dimensions

    Waveshare Electronics
    WS-28259

    Špecifické referencie

    3.52inch E-Paper Display (B) (raw display only) E-Ink Display, 360x240, Red/Black/White, SPI Interface (WS-28259)

    14,28 €

    11.90 € bez DPH