RLX COMPONENTS s.r.o. , Electronic Components Distributor.
RLX COMPONENTS s.r.o. , Electronic Components Distributor.
ESP32-S3 2.8inch Display Dev. Board Type B, 480×640, IPS, 32-bit LX7 WiFi/BT, ESP32 (WS-30103)
WS-30103
34,44 €
28.00 € bez DPH
ESP32-S3 2.8inch Display Dev. Board Type B, 480×640, IPS, 32-bit LX7 WiFi/BT, ESP32 (WS-30103)
ESP32-S3 2.8inch Display Dev. Board Type B, 480×640, IPS, 32-bit LX7 WiFi/BT, ESP32 (WS-30103)
- With Touch Function
ESP32-S3 2.8inch Display Development Board Type B, 480×640, IPS, 32-bit LX7 Dual-core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, ESP32 With Display
ESP32-S3-Touch-LCD-2.8B
Integrates 480 × 640 RGB interface display, onboard multiple peripheral interfaces
Version Options
ESP32-S3-LCD-2.8B
without touch control
ESP32-S3-Touch-LCD-2.8B
with touch control
Features
This product is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch LCD display (optional for touch function) can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
- Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
- Onboard 2.8inch LCD display, 480×640 resolution
- Supports touch control via I2C interface, with interrupt support (for touch version only)
- Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
- Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
- Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
LCD parameters
| Display Panel | IPS LCD | Display Size | 2.8 inch |
|---|---|---|---|
| Resolution | 480 × 640 | Display Colors | 65K |
| Communication Interface | SPI + RGB | Driver IC | ST7701 |
| Touch | Supported (Touch Version Only) | Touch IC | GT911 (Touch Version Only) |
Application Scenarios
IPS Display Panel
Excellent display performance, wide viewing angle
Supports ESP-IDF, Arduino IDE
Comprehensive SDK, dev resources, and tutorials to help you easily get started
Supports multiple peripherals
Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc.
What's On Board
- ESP32-S3R8
Dual-core processor, up to 240MHz operating frequency - 16MB Flash
- QST attitude sensor
QMI8658 (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer) - Onboard ceramic antenna
- TCA9554PWR
GPIO expander chip - RTC chip
PCF85063 RTC chip - MP1605GTF-Z
Power module, 2A current (MAX) - Battery recharge manager
- Buzzer
- TF card slot
on the back side of the PCB - BOOT button
- RESET button
- IPEX1 connector
Switching to use external antenna via resoldering the resistor - 2*12PIN 2.54mm pin header
- RTC battery header
for connecting rechargeable RTC battery - MX1.25 battery header
MX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging - UART header
- Charge indicator
- USB Type-C port
- Power indicator
- I2C header
connecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions - Battery power supply control button
outline dimensions
ESP32-S3-LCD-2.8B
ESP32-S3-Touch-LCD-2.8B
Resources & Services
Balenie Obsahuje / Package Content
ESP32-S3-Touch-LCD-2.8B
- ESP32-S3-Touch-LCD-2.8B x1
- SH1.0 4PIN cable ~100mm x2
WS-30103
Špecifické referencie
ESP32-S3 2.8inch Display Dev. Board Type B, 480×640, IPS, 32-bit LX7 WiFi/BT, ESP32 (WS-30103)
ESP32-S3 2.8inch Display Dev. Board Type B, 480×640, IPS, 32-bit LX7 WiFi/BT, ESP32 (WS-30103)
34,44 €
28.00 € bez DPH