BPI Bit Banana Pi BPI:bit ESP32 Xtensa LX6, supports Webduino, Arduino, MicroPython,Scratch X

BPI Bit Banana Pi BPI:bit ESP32 Xtensa LX6, supports Webduino, Arduino, MicroPython,Scratch X

Kód BPI-BIT (160015)

Popis
Detaily produktu

BPI Bit Banana Pi BPI:bit ESP32 Xtensa LX6, supports Webduino, Arduino, MicroPython,Scratch X

Introduction

The BPI bit (also referred to as BPI-bit, stylised as bpi:bit) is an ESP32 with 32-bit Xtensa LX6 dual-core processor based embedded system. It supports Webduino, Arduino, MicroPython as well as Scratch X programming environments.

BPI:bit hardware main function:

bpi:bit board is 5 cm x 5 cm in size, weighs 10 ~ 12 grams, it houses a 20-Pin edge connector, built-in lighting matrix with 25 programmable full-color LEDs , two photosensitive light sensors, two programmable buttons, an NTC resistor, a buzzer and a nine shaft sensor (triaxial acceleration Three-axis gyroscope and three-axis magnetic compass),

the I/O space configuration is as follows:

Full color LED matrix: GPIO4
Photosensitive sensor: GPIO36 (Analog A0, upper left), GPIO39 (Analog A3, upper right)
Button switch : GPIO35 (Botton A), GPIO27 (Botton B)
Temperature sensor: GPIO34 (Analog A6)
Buzzer: GPIO25
MPU-9250 9-axis sensor: GPIO0, GPIO21(SDA), GPIO22(SCL)
wiki.banana-pi.org/BPI:bit_for_MicroPython

GPIO control of BPI:bit
Light Sensor(L)	GPIO 36	Analog Input
Light Sensor(R)	GPIO 39	Analog Input
Botton A	GPIO 35	Digital Input
Botton B	GPIO 27	Digital Input
Temperature Sensor	GPIO 34	Analog Input
Buzzer	GPIO 25	PWM(Digital Output) / Analog Output
RGB_LED	GPIO 4	Digital Output
MPU9250_SCL	GPIO 22	Digital Output
MPU9250_SDA	GPIO 21	Digital Output
MPU9250_INT	GPIO 16	Digital Input
R_LED(SPI_SCK)	GPIO 18	Digital Output

Hardware

Hardware description

Webduino Bit is the latest board of Webduino with much more sensors on top of its basic functions(Wi-Fi connection, muti-connectivity,multi-board...). It uses ESP32 module,one of the most efficient and stable chipset in the market, which has built-in 2.4G Wi-Fi and Bluetooth,448KB ROM,520KB SRAM,speed up to 600 DMIPS,and 40 nm technology.

Webduion bit board has a compact size of 50mm x 50mm, weighs 10-12 grams.It has 20 pins at the bottom,25 full color LED array in the middle, two photo cells,two buttons, one thermistor,one buzzer,one 9-axis sensor(3-axis accelerometer,3-axis gyroscope and 3-axis magnetometer)

Hardware interface

PIN definitions

The edge interface is much compatible with those of micro:bit. so you may able to use micro:bit accessories on bpi:bit

MPU9250 9-axis sensor

The 9-axis sensor, MPU9250, is placed on the BPI:bit board. and MPU9250 uses I2C 0x69 address.

The 9-axis is the combination of 3 separate triple axis sensors. For more detailed information of this chip, click here MPU 9250 datasheet to view the datasheet.

BPI-BIT MPU9250 Library and how to : https://github.com/BPI-STEAM/MPU9250

BPI:bit power

When you use BPI:bit, you need to supply the board first, and the bit supports three power supply modes

1.micro USB port:USB cable power supply, the design of BPI:bit board has Micro USB interface, which is quite common in daily life and is quite convenient to use.
2.Battery port:Through 2 pin battery power supply socket, can through the lithium battery, battery pack to power supply board, interface fool proof design, don't worry about the power supply through the 2 pin battery power supply socket, can through the lithium battery, battery pack to power supply board, interface fool proof design, don't have to worry about power supply meet the problem.
3.Goldfinger ：Power is supplied through the gold finger, and the gold finger at the bottom of the board contains the power interface. Meanwhile, it has both input and output functions and has high compatibility.

BPI:bit VS micro:bit

bpi:bit VS micro:bit
Module	bpi:bit	micro:bit
CPU	Dual-core 32bit Xtensa LX6, up to 240MHz	NXP KL26Z 32bit ARM Cortex M0, up to 16MHz
RAM	520 KB	16 KB
ROM	448 KB	Unkown
Flash	4096 KB	256 KB
Bluetooth	BT4.2 BR/EDR and BLE	BLE only
WIFI	802.11 b/g/n/e/i	N/A
Buzzer	1x Buzzer	N/A
5*5 LEDS	25 intelligent-control full-color (16777216 color) LEDs, Cascading all LEDs by a single line.	25 red LEDs
photosensitive sensor	2 light sensors	Basic light detection function on LEDs
temperature sensor	Stand along temperature sensor	On CPU chip temperature sensor
Motion sensor	MPU-9250 9-axis Motion Tracking : 3-axis accelerometer, 3-axis magnetometer, 3-axis gyroscope	3-axis Accelerometer; 3-axis magnetometer; no gyroscope, no motion processor
IO interface	edge interface (compatible with most micro:bit I/O features)	edge interface
Button	2 programmable buttons	2 programmable buttons
micro USB	1x micro USB(UART)	1 x micro USB(Mass Storage Device)
Software	Webduino, Arduino, MicroPython, Scratch X	Microsoft MakeCode, MicroPython, Scratch X
Size	5*5 cm	5*4 cm