• Novinka
    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)
    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)
    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)
    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)
    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)
    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)

    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)

    WS-27779
    34,68 €

    28.90 € bez DPH

    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)

    Množstvo:
    OUT OF STOCK

    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)

    ESP32-S3 RGB LCD Driver Board, Equipped With 32-Bit 240MHz LX7 Dual-Core Processor, 8MB PSRAM And Flash, WiFi & Bluetooth Support, Options For 2.1Inch RGB Touch Display Module

    ESP32-S3 RGB LCD Driver Board

    Compatible With Development Environments Such As Arduino-IDE, ESP-IDF, Etc.

    Based On ESP32-S3-WROOM-1-N8R8 Module

     ESP32-S3 LCD Driver Board, front view and features
    Version Options
    ESP32-S3 LCD Driver Board, RGB LCD driver board

    ESP32-S3-LCD-Driver-Board
    the RGB LCD driver board only

     
    ESP32-S3 LCD Driver Board, with 2.1inch RGB round touch display

    ESP32-S3-Touch-LCD-2.1-D
    the RGB LCD driver board with 2.1inch
    RGB round touch display

     
    ESP32-S3 LCD Driver Board, with 2.8inch RGB round touch display

    ESP32-S3-Touch-LCD-2.8-D
    the RGB LCD driver board with 2.8inch
    RGB round touch display

     
    ESP32-S3 LCD Driver Board, with 4inch RGB touch display

    ESP32-S3-Touch-LCD-4-D
    the RGB LCD driver board with 4inch RGB
    touch display

    * for more detailed part list, please refer to the Package Content

    Driver Board Features

    The ESP32-S3-LCD-Driver-Board is a compact-size microcontroller development board with 40Pin SPI+RGB and 18Pin SPI LCD connectors. Integrates high-capacity Flash and PSRAM, allows connecting to LCD screen through onboard two LCD connectors, can smoothly run GUI programs such as LVGL.

    Adopts ESP32-S3-WROOM-1-N8R8 module, which is equipped with Xtensa 32-bit LX7 dual-core processor with 240MHz running frequency, built-in 512KB SRAM (TCM) and 8MB PSRAM; Onboard ETA6096 high-efficiency Lithium battery recharge manager and MX1.25 lithium battery header, adapting 20pin GPIO header which is compatible with 18Pin SPI screen. Supports expanding various peripheral devices and is easy to use.

    You can choose Arduino-IDE, ESP-IDF, or other development environments in software so that you can easily and quickly get started and apply it to the product.

    Key features:

    • Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
    • Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory
    • Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance
    • Type-C connector, easier to use
    • Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability
    • Onboard Lithium battery recharge manager ETA6096 and MX1.25 lithium battery header
    • Castellated module allows soldering direct to carrier boards
    • Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

    Options For RGB Displays

    Onboard 40PIN Connector, Compatible With Multiple RGB666/565 LCD Displays

    MODEL DISPLAY TOUCH
    RESOLUTION DISPLAY INTERFACE DISPLAY PANEL DRIVER CHIP TOUCH CHIP TOUCH INTERFACE TOUCH TYPE TOUCH POINT
    2.1INCH ROUND TOUCH DISPLAY 480×480 SPI+RGB TFT ST7701 CST820 I2C capacitive single point
    2.8INCH ROUND TOUCH DISPLAY 480×480 SPI+RGB TFT ST7701 GT911 I2C capacitive 5-point
    4INCH TOUCH DISPLAY 480×480 SPI+RGB TFT ST7701 GT911 I2C capacitive 5-point

    Note:
    The LCD module is optional, please refer to the Package Content for more detailed part list.
    The LCD modules listed above are the ones that've been tested; If you need to use with other LCDs, please confirm the interface and circuit compatibility of your screen and make necessary adaptations.

    2.1″ Round Touch Display

    2.1inch TFT Round Display, Single Point Touch, 480×480 Pixels, RGB Display Interface

    ESP32-S3 LCD Driver Board, connecting with 2.1inch round touch display

    2.8″ Round Touch Display

    2.8inch TFT Round Display, 5-Point Touch, 480×480 Pixels, RGB Display Interface

    ESP32-S3 LCD Driver Board, connecting with 2.8inch round touch display

    4″ Touch Display

    4inch TFT Display, 5-Point Touch, 480×480 Pixels, RGB Display Interface

    ESP32-S3 LCD Driver Board, connecting with 4inch square touch display

    Supports Other Displays With I2C/SPI Interfaces

    Onboard 18PIN Connector, And Reserved 20PIN GPIO Header

    ESP32-S3 LCD Driver Board, connecting with other displays with I2C/SPI interfaces



    Application Scenarios
    ESP32-S3 LCD Driver Board, application scenarios
    What's On Board
    ESP32-S3 LCD Driver Board, what's on board
    1. ESP32-S3-WROOM-1-N8R8
      Xtensa 32-bit LX7 dual-core processor
    2. 20PIN header
    3. AP3032KTR
      DC/DC boost chip
    4. TCA9554PWR
      GPIO expansion chip
    5. 18PIN SPI display connector
    6. 40PIN SPI+RGB display connector
    7. ME6217C33M5G
      800mA output, low dropout, high rejection rate
     
    1. ETA6096
      high-efficiency Lithium battery recharge manager
    2. Power indicator
    3. MX1.25 Lithium battery header
      MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
    4. BOOT button
      press it before resetting to enter download mode
    5. RESET button
    6. USB Type-C connector

    Pin Definition
    ESP32-S3 LCD Driver Board, pin definition
    CONNECTOR ①: 40PIN SPI+RGB CONNECTOR ②: 18PIN PI
    PIN NO. SYMBOL ESP32S3 CONTROL PIN FUNTION PIN NO. SYMBOL ESP32S3 CONTROL PIN FUNTION
    1 LEDA - backlight positive 1 VCC 3.3V LCD power input
    2,3 LEDK - backlight negative 2 BL 6 backlight
    5 VCI 3.3V I/O pins power supply 3 GND GND ground
    6 RESET EXIO3 reset pin 4 SCLK 1 SPI CLK pin
    7,8 NC - not connected 5 MOSI 2 SPI MOSI pin
    9 SDA 1 SPI data signal pin 6 MISO 42 SPI MISO pin
    10 SCL 2 SPI clock signal pin 7 DC 41 LCD data/command pin
    11 CS 42 SPI chip select pin 8 RST 40 LCD reset pin
    12 PCLK 41 pixel clock pin 9 CS' 39 LCD chip select pin
    13 DE 40 control mode selection 10 NC - not connected
    14 VS 39 Frame SYNC signal, vertical synchronizing input 11 NC - not connected
    15 HS 38 Line SYNC signal, horizontal synchronizing input 12 RST' 16 touch reset pin
    16~21 B0~B5 NC, 5, 45, 48, 47, 21 blue data input 13 SCL' 7 touch I2C clock pin
    22~27 G0~G5 14, 13, 12, 11, 10, 9 green data input 14 SDA' 15 touch I2C data pin
    28~33 R0~R5 NC, 46, 3, 8, 18, 17 red data input 15 INT' 17 touch signal interrupt
    35 TP-INT 16 touch signal interrupt 16 NC - not connected
    36 TP-SDA 15 touch I2C data pin 17 NC - not connected
    37 TP-SCL 7 touch I2C clock pin 18 NC - not connected
    38 TP-RST EXIO1 touch reset pin
    39 TP-VCC 3.3V touch power supply
    4,34,40 GND GND ground

    Outline Dimensions
    ESP32-S3 LCD Driver Board, outline dimensions ESP32-S3-Touch-LCD-2.1-D outline dimensions ESP32-S3-Touch-LCD-2.8-D outline dimensions ESP32-S3-Touch-LCD-4-D outline dimensions

    Balenie Obsahuje / Package Content

    ESP32-S3-Touch-LCD-2.1-D

    1. ESP32-S3-LCD-Driver-Board x1
    2. 2.1inch RGB touch display x1
    3. 20pin male pinheader (yellow) x1
    Waveshare Electronics
    WS-27779

    Špecifické referencie

    ESP32-S3 RGB LCD Driver Board, 32-bit 240MHz LX7 Dual-Core, 8MB PSRAM Flash, WiFi&BT, 2.1inch RGB Touch Display (WS-27779)

    34,68 €

    28.90 € bez DPH