• Novinka
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)
    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)

    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)

    WS-25279
    70,80 €

    59.00 € bez DPH

    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)

    Množstvo:
    OUT OF STOCK

    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)

    LC29H Series Dual-Band GPS Module For Raspberry Pi, Dual-Band L1+L5 Positioning Technology, DA GPS/RTK HAT , GNSS Expansion Board, With GNSS Active Positioning Antenna

    Raspberry Pi Dual-Band RTK
    Centimeter-Level Positioning GPS Module

    Dual-Band L1+L5 | RTK Centimeter-Level Accuracy | Raw Observation Data Output

    LC29H-GPS-RTK-HAT-details-1.jpg
    Features At A Glance

    The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption. With built-in LNA and SAW filter to achieve high sensitivity and strong anti-interference capability. Adopts dual-band positioning and RTK technology to meet the need of centimeter-level high-precision positioning. Ideal for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart farm machinery, shared two-wheelers, etc.

      • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
      • Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
      • Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption

      • LC29H(AA) GPS HAT with the following features:
        • Supports positioning augmentation systems (WAAS, EGNOS, MSAS and GAGAN) to improve the positioning performance of service areas
        • Supports EASY technology, to realize the positioning using stored information such as ephemeris and almanac data when there is no signal, and improve the positioning and time to first fix

      • LC29H(DA) GPS/RTK HAT with the following features:
        • Supports fast convergence dual-band RTK centimeter-level positioning, suitable for high-precision positioning of terminal devices

      • LC29H(BS) GPS/RTK HAT with the following features:
        • Supports GNSS raw observation and correction data output, suitable for establishing RTK base station

    • Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance
    • Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
    • A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds
    • Support QGNSS software, easy to set various module functions
    • Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
    • Onboard 4 LED indicators for module operating status
    • Comes with online development resources and manual (Python examples for Raspberry Pi/Jetson Nano)
    Version Options
    LC29H-GPS-RTK-HAT-details-3-1.jpg

    LC29H(AA) GPS HAT
    Supports positioning augmentation system and EASY technology

     
    LC29H-GPS-RTK-HAT-details-3-2.jpg

    LC29H(DA) GPS/RTK HAT
    Supports RTK Rover to realize high-precision centimeter-level positioning

     
    LC29H-GPS-RTK-HAT-details-3-3.jpg

    LC29H(BS) GPS/RTK HAT
    Supports RTK Base, can establish a base station to transmit correction data

    Specifications
    PRODUCT LC29H(AA) GPS HAT LC29H(DA) GPS/RTK HAT LC29H(BS) GPS/RTK HAT ZED-F9P GPS-RTK HAT
    FREQUENCY BAND GPS/QZSS: L1C/A, L5
    BDS: B1I, B2a
    Galileo: E1, E5a
    GLONASS: L1
    GPS/QZSS: L1C/A, L2C
    BDS: B1I, B2I
    Galileo: E1B/C, E5a
    GLONASS: L1OF, L2OF
    NUMBER OF CONCURRENT GNSS GPS/QZSS+BDS+Galileo+GLONASS
    SBAS (WAAS, EGNOS, MSAS, GAGAN) support - support
    RTK FUNCTION - RTK Rover RTK Base RTK Rover and Base
    POSITIONING ACCURACYPVT 1m CEP - 1.5m CEP
    RTK - 0.01m+1ppm CEP - 0.01m+1ppm CEP
    NAVIGATION UPDATE RATEPVT 1~10Hz - 1~10Hz
    RTK - 1Hz - 1~8Hz
    RAW 1Hz 1~20Hz
    RTK CONVERGENCE TIME - <10s - <10s
    TIME TO FIRST FIX (AGNSS OFF)COLD STARTS 26s - 24s
    HOT STARTS 1s - 2s
    AIDED STARTS 16s - 2s
    TIME TO FIRST FIX (EASY ON) 2s -
    TIME TO FIRST FIX (AGNSS ON)COLD STARTS 5s - TBD
    HOT STARTS 5s - TBD
    AIDED STARTS 5s - TBD
    SENSITIVITYTRACKING AND NAVIGATING -165dBm -167dBm
    RE-ACQUISITION -159dBm -157dBm -159dBm -160dBm
    COLD STARTS -147dBm -145dBm -147dBm -148dBm
    VELOCITY ACCURACY 0.2m/s - 0.05m/s
    PPS ACCURACY 20ns - 30ns
    DYNAMIC PERFORMANCE Acceleration (Max): 4g
    Altitude (Max):10000m Altitude (Max):50000m
    Velocity (Max): 500m/s
    COMMUNICATION INTERFACE UART(9600~3000000bps, 115200bps by default),
    I2C(Max 400KHz)
    USB, UART(4800~921600bps, 9600bps by default), I2C(Max 400KHz), SPI(5MHz)
    PROTOCOL NMEA 0183 V4.10, RTCM 3.x NMEA 0183 V4.10,UBX, RTCM 3.3
    POWER SUPPLY 5V
    OVERALL CURRENT <40mA@5V (Continue mode)
    OPERATING TEMPERATURE -40~85℃
    DIMENSIONS 65×30.5mm

    Standard Raspberry Pi 40PIN GPIO

    Compatible With Raspberry Pi Series Boards

    LC29H-GPS-RTK-HAT-details-5-1.jpg

    Working With Raspberry Pi Zero

     
    LC29H-GPS-RTK-HAT-details-5-2.jpg

    Working with Raspberry Pi 4B

    * for reference only, the Raspberry Pi boards are NOT included.

    Dual-Band L1+L5 Positioning Technology

    Supports Simultaneous Tracking Of L1+L5 Dual-Band Satellite Signals
    Reducing Multipath Effects In Urban Canyons And Improving Positioning Accuracy

    LC29H-GPS-RTK-HAT-details-7.jpg
    RTK Mobile Station, RTK Base Station
    Centimeter Positioning

    The LC29H(BS) Module Is Used As An RTK Base Station, While The LC29H(DA) Module Is Used As An RTK Mobile Station

    By setting up continuous running reference stations on the ground known fixed coordinates using the LC29H (BS) module, or by paid RTK base station enhanced services, transmitting GNSS calibration value to LC29H (DA) terminals which uploading rough positioning data, the terminals, with errors like multipath refraction, is able to calculate error value in real time, for centimeter-level positioning in seconds.

    LC29H-GPS-RTK-HAT-details-9.jpg
    Concurrent Reception Of Multi-GNSS Systems

    Supports GPS, BDS, GLONASS, Galileo, QZSS
    And Still Retains Low Power Consumption

    LC29H-GPS-RTK-HAT-details-11.jpg
    Supports Multi-Frequency Active 
    Interference Cancellation 

    Effectively Suppressing Or Eliminating Narrowband Signal (WiFi/2/3/4/5G) Interference To Ensure Navigation Accuracy

    LC29H-GPS-RTK-HAT-details-13.jpg
    Assisted GNSS Support

    Reducing The Time To First Fix (TTFF) With Cold Start When Powered On To 5 Seconds

    LC29H-GPS-RTK-HAT-details-15.jpg
    Applications

    Ideal For Real-Time Tracking Systems And Sharing Economy Applications, Helping To Develop Applications Such As Drones, Smart Farm Machinery, Shared Two-Wheelers, Etc.

    LC29H-GPS-RTK-HAT-details-17.jpg
    What's On Board
    LC29H-GPS-RTK-HAT-details-intro.jpg
    1. LC29H module
    2. RT9166A-28PXL
      5V to 2.8V LDO chip
    3. CP2102N
      USB to UART chip
    4. Raspberry Pi 40PIN GPIO header
      for connecting with Raspberry Pi
    5. UART selection jumper
      A: control the LC29H via USB to UART
      B: control the LC29H via Raspberry Pi
      C: access Raspberry Pi via USB to UART
    6. IPEX 1 connector
      LC29H module antenna connector
    7. Micro USB interface
     
    1. RT9193-33PB
      5V to 3.3V LDO chip
    2. RESET button
      reset the LC29H module
    3. Status Indicators
      PWR: Power Indicator
      RXD/TXD: UART transceiver indicator
      PPS: GPS status indicator
    4. NDC7002N
      I2C voltage translator
    5. ML1220 Battery holder
      supports ML1220 rechargeable cell, for preserving ephemeris information and hot start
    Pinout Definition
    LC29H-GPS-RTK-HAT-details-inter.jpg
    Product Show
    LC29H-GPS-RTK-HAT-details-19.jpg

    Outline Dimensions
    LC29H-GPS-RTK-HAT-details-size.jpg
    Resources & Services
    res_banner.png

    Balenie Obsahuje / Package Content

    1. LC29H GPS HAT x1  ( Part Number: LC29H(DA) GPS/RTK HAT )
    2. 2x20PIN female header x1
    3. GPS External Antenna (D) x1
    4. IPEX 1 to SMA cable ~17cm x1
    5. Screws pack x1

    LC29H-GPS-HAT-details-pack.jpg

    Waveshare Electronics
    WS-25279

    Špecifické referencie

    LC29H Series Dual-band GPS Module for Raspberry Pi, Dual-band L1+L5 Positioning, (DA) GPS/RTK HAT (WS-25279)

    70,80 €

    59.00 € bez DPH