• Novinka
    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)
    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)
    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)
    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)
    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)
    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)

    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)

    WS-27096
    70,68 €

    58.90 € bez DPH

    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)

    Množstvo:
    OUT OF STOCK

    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)

    EC200U-AU C4-P01 Development Board Designed For QuecPython, Multi-Mode & Multi-Band Support, LTE Cat-1 / Bluetooth Communication, GNSS Positioning, Compact Size & Cost-Effective

    EC200U-AU C4-P01 Development Board

    Compact & Portable Development Board Designed for QuecPython

    Supports LTE Cat-1 / Bluetooth Communication, GNSS Positioning

    EC200U C4-P01 development board, front view
    Features At A Glance

    The EC200U-AU C4-P01 development board is equipped with EC200U-AU LTE Cat 1 wireless communication module, with maximum data rate up to 10 Mbps downlink and 5 Mbps uplink, supports multi-mode & multi-band and is cost-effective. Designed in the compact and unified form factor, compatible with Quectel multi-mode LTE Standard EC20-CE. Onboard Type-C port for easy development with just a USB Type-C cable. Onboard 40PIN GPIO pin header which is compatible with most Raspberry Pi HATs.

    • Equipped with EC200U-AU LTE Cat 1 wireless communication module, multi-mode & multi-band support
    • Onboard 40PIN GPIO header, compatible with most Raspberry Pi HATs
    • 5 LEDs for indicating module operating status
    • Supports TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS protocols, etc.
    • Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS)
    • Onboard Nano SIM card slot and eSIM card slot, dual card single standby
    • Onboard MIPI connector for connecting MIPI screen and is fully compatible with Raspberry PI peripherals
    • Onboard camera connector, supports customized SPI cameras with a maximum of 300,000 pixels
    • Provides tools such as QPYcom, Thonny IDE plugin, and VSCode plugin, etc. for easy learning and development
    • Comes with online development resources and manual (example in QuecPython)

    Specifications
    MODEL BG95-M3 EC200U-EU EC200U-AU
    Product Picture BG95-M3 EC200U-EU EC200U-AU
    Applicable Region Global Europe, Middle East, Africa, Australia, New Zealand, Brazil Australia/Latin America
    FREQUENCY BAND
    LTE-FDD Cat M1:
    B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B85
    Cat NB2:
    B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B28, B66, B71, B85
    B1, B3, B5, B7, B8, B20, B28 B1, B2, B3, B4, B5, B7, B8, B28, B66
    LTE-TDD N/A B38, B40, B41
    GSM / GPRS / EDGE 850, 900, 1800, 1900 MHz GSM: B2, B3, B5, B8
    GNSS GPS, GLONASS, BDS, Galileo, QZSS
    Bluetooth N/A Bluetooth 4.2 (BR/EDR)
    Wi-Fi Scan N/A 2.4 GHz 11b (Rx)
    DATA TRANSMISSION
    CAT 1 N/A LTE-FDD: DL 10 Mbps; UL 5 Mbps
    LTE-TDD: DL 8.96 Mbps; UL 3.1 Mbps
    NB-IoT Cat NB2:
    DL 127 Kbps; UL 158.5 Kbps
    Cat NB1:
    DL 32 Kbps; UL 70 Kbps
    N/A
    Cat-M DL 588 Kbps; UL 1119 Kbps N/A
    GSM / GPRS / EDGE EDGE: DL 296 Kbps; UL 236.8 Kbps
    GPRS: DL 107 Kbps; UL 85.6 Kbps
    GSM: DL 85.6 Kbps; UL 85.6 Kbps
    OTHERS
    Type-C USB Port Supports AT commands testing, GNSS positioning, firmware upgrading, etc.
    Communication Protocol PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6 TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS
    SIM Card Nano SIM card (supports 1.8V only) Nano SIM and eSIM, dual card single standby
    Indicator SIM_CHK: lights up when a SIM card is inserted into the card slot
    NET: Network indicator
    PSM: Sleep indicator
    PWM: PWM function indicator
    PWR: Power indicator
    P01: Module Pin 1, default as EC200A-XX PWM0
    P05: Module Pin 5, NET_MODE indicator
    SCK1: SIM1 detection indicator, lights up when SIM1 card is inserted
    SCK2: SIM2 detection indicator, lights up when SIM2 card is inserted
    PWR: Power indicator
    Buttons PWK: Power ON/OFF
    PON: PSM wake-up
    BOOT: Forcing into firmware burning mode
    USB ON/OFF: USB power consumption detection switch
    PWK: Power ON/OFF
    RST: Reset
    BOOT: Forcing into firmware burning mode
    USB ON/OFF: USB power consumption detection switch
    Antenna Connectors LTE main antenna + DIV antenna + GNSS antenna LTE main antenna + DIV / WIFI (scanning only) / Bluetooth antenna + GNSS antenna
    Operating Temperature -30 ~ 75°C
    Storage Temperature -45 ~ 90°C

    Type-C Interface

    Easy To Develop With Just A USB Type-C Cable

    EC200U C4-P01 development board with Type-C interface

    Onboard 40PIN GPIO Header

    Compatible With Most Raspberry Pi HATs

    EC200U C4-P01 development board with 40PIN GPIO pin header

    Supports Various Development Tools

    Provides Tools Such As QPYcom, Thonny IDE Plugin, And VSCode Plugin, Etc. For Easy Learning And Development

    EC200U C4-P01 development board supports various development tools

    What’s Onboard
    EC200U C4-P01 development board onboard components

    Onboard Components

    1. EC200U module
    2. PWR Power indicator
    3. NET Network indicator
    4. PWM function indicator
    5. SIM1 indicator
      lights up when SIM1 card is inserted
    6. SIM2 indicator
      lights up when SIM2 card is inserted
    7. Power ON/OFF button
    8. Reset button
    9. BOOT button
      Press before powering on to force firmware burning mode
    10. USB detection ON/OFF
      Normally closed: USB can be connected normally;
      Normally open: Type-C supplies power only to the evaluation board, used for module power consumption measurement

    Interfaces

    1. Raspberry Pi GPIO Header
      Compatible with Raspberry Pi HATs, for more details, please refer to Pinout Definition
    2. Power ON/OFF jumper
      Connect: auto turn on, short press PWK button to restart
      Disconnect: short press PWK button to power on, long press to power off
    3. 1.8V output jumper
      Connect: outputs 1.8V externally
      Disconnect: used to test power consumption
    4. Module power supply jumper
      Connect: DCDC to power the module
     
    1. SD power supply selection
      Connect: enable SD power supply
    2. GNSS active power supply selection
      Connect: enable GNSS active power supply
    3. SIM card slot 1
      for Nano SIM card
    4. SIM card slot 2
      for eSIM card
    5. SD card slot
      Before using the SD card, enable SD power supply in the 10-Pin Header
    6. MIPI interface
      Supports MIPI LCD and is fully compatible with Raspberry Pi peripherals
    7. Camera interface
      Supports customized SPI cameras with a maximum of 300,000 pixels
    8. Reserved matrix keyboard pads
      users can customize soldering or connection of the keyboard buttons (Note: the keyboard buttons are not included by default)
    9. USB Type-C port
    10. ADC testing points
      ADC0_IN/ADC1_IN ADC measurement interface
    11. LTE main antenna connector
    12. GNSS antenna connector
    13. DIV/Wi-Fi/Bluetooth antenna connector
    14. MIC & SPK header

    Pinout Definition
    EC200U C4-P01 development board pinout definition
    Outline Dimensions
    EC200U C4-P01 development board outline dimensions

    Balenie Obsahuje / Package Content

    EC200U-AU C4-P01 x1

    EC200U-AU C4-P01

    Waveshare Electronics
    WS-27096

    Špecifické referencie

    EC200U-AU C4-P01 development board QuecPython, Multi Mode-Band LTE Cat-1 / Bluetooth Communication, GNSS (WS-27096)

    70,68 €

    58.90 € bez DPH