e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)
      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)
      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)
      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)
      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)

      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)

      WS-17211
      39,48 €

      32.90 € bez DPH

      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)

      Množstvo:
      OUT OF STOCK

      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)

      Overview

      This is a Raspberry Pi IoT driver board for e-Paper raw panels. It allows getting text/image data from IoT clouds through NB-IoT/eMTC/EDGE/GPRS network connection, and then display them on the e-Paper.

      Features

      • Onboard SIM7000E module, controlled via UART, supports NB-IoT/eMTC/EDGE/GPRS communication
      • e-Paper interface, controlled via SPI, compatible with various Waveshare SPI e-Paper raw panels
      • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
      • Breakout SIM7000E and e-Paper control pins, for connecting with host control boards like STM32
      • 3.7V lithium battery port and charging circuit, provides power to SIM7000E module or external 3.3V system (5V system like Raspberry Pi requires another power supply)
      • Onboard voltage translator, select 3.3V/5V operating voltage by switch
      • Provides Windows host code (based on Alibaba Cloud), make it easy to study/develop, or integrate it into IoT applications
      • Comes with development resources and manual (examples for Raspberry Pi/STM32)
      • Part Number: e-Paper NB-IoT/GPRS HAT (EN) 
      • UPC: 614961956247

      Specifications

      • Communication interface: UART + SPI (4-wire SPI by default, switch to 3-wire SPI by soldering)
      • Communication module: SIM7000E
        • Quad-Band LTE-FDD B3/B8/B20/B28
        • GPRS/EDGE 900/1800Mhz
        • GNSS (GPS, GLONASS, BeiDou, and Galileo, GNSS antenna is required and NOT included)
      • Support SIM card: NB-IoT specific card, or 1.8V/3V normal SIM card
      • Applicable region: China mainland, southeast Asia, Europe, Africa, Australia, etc. (for reference only, please check the supported bands according to your local service provider)
      • Power supply voltage: 5V
      • Logic level: 5V / 3.3V
      • Applicable battery: 3.7V lithium battery via PH2.0 connector (NOT included)
      • Dimensions: 56.5mm x 65mm

      Applications

      • Shelf label
      • AD label
      • IoT applications which requires remote refreshing

      What's on Board

      e-Paper NB-IoT/GPRS HAT on board resource

      1. SIM7000E communication module
      2. MP1482 power chip
      3. TXS0108E voltage translator
      4. TXB0104PWR voltage translator
      5. Raspberry Pi GPIO connector: for connecting Raspberry Pi
      6. SIM7000E and e-Paper control pins: for connecting with host control boards like STM32
      7. SIM card slot: for SIM cards with compatible bands
      8. e-Paper interface: for connecting e-Paper, compatible with various Waveshare SPI e-Paper raw panels
      9. USB port: control the SIM7000E module by AT commands through the USB port
      10. LTE antenna connector: connects LTE antenna for NB-IoT/eMTC/EDGE/GPRS communication
      11. GNSS antenna connector: connects GNSS antenna (IPEX connector, NOT included) for GPS/BeiDou/GLONASS/Galileo positioning
      12. 3.7V lithium battery port: provides power to SIM7000E module or external 3.3V system
      13. LED indicators:
        NET: network status indicator
        Charge: charge indicator, light up when charging, off when fully charged
        Warning: battery reverse connection warning
      14. PWRKEY button: SIM7000E on/off
      15. BOOT button: enable battery power supply
      16. SIM7000E power supply selection: the SIM7000E can be powered from Raspberry Pi 5V or lithium battery 3.7V
      17. e-Paper configuration: configured according to the connected e-Paper
        A: for 1.54inch e-Paper, 2.13inch e-Paper, and 2.9inch e-Paper
        B: for other e-Paper
      18. Operating voltage selection: 3.3V or 5V
      19. SPI selection:
        0: enable 4-wire SPI (default)
        1: enable 3-wire SPI

      Example

      e-Paper-NB-IoT-GPRS-HAT-5_800.jpg

      Dimensions

      e-Paper NB-IoT/GPRS HAT dimensions

      Development Resources

      Wiki : www.waveshare.com/wiki/e-Paper_NB-IoT_GPRS_HAT

      Package Content :

      Note: Raspberry Pi and e-Paper panels are NOT included.

      1. e-Paper NB-IoT/GPRS HAT x1
      2. LTE full bands PCB antenna x1
      3. e-Paper Adapter x1
      4. 24PIN FFC x1
      5. 2×20PIN female pinheader x1
      6. RPi screws pack (2pcs) x1

      e-Paper-NB-IoT-GPRS-HAT-pack_800.jpg

      Waveshare Electronics
      WS-17211

      Špecifické referencie

      e-Paper IoT Driver HAT for Raspberry Pi, Supports NB-IoT/eMTC/GPRS (WS-17211)

      39,48 €

      32.90 € bez DPH