4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)
      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)
      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)
      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)
      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)

      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)

      WS-19283
      65,88 €

      54.90 € bez DPH

      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)

      Množstvo:
      OUT OF STOCK

      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)

      4.01inch Colorful E-Paper E-Ink Display HAT For Raspberry Pi, 640×400 Pixels, ACeP 7-Color, SPI Interface

      4.01" 7-COLOR E-PAPER MODULE

      Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

      Ideal for price tags, shelf labels, industrial instruments...

      4.01inch-e-Paper-HAT-F-details-1.jpg
        • SizeDimension.png4.01"
        • ResolutionResolution.png640×400
        • Viewing AngleViewing_angle.png>170°
        • Display ColorDisplay-7color.png7-Color
        • Grey ScaleGray-scale-2.png2
      • CommunicationSPI.pngSPI
      • Power ConsumptionBattery.pngUltra Low
      • Display DurationLow_power.pngPersists without Power
      • Display Panele-Paper.pngE-paper
      • ExperiencePaper.pngPaper-like
      • Comfortably ReadingEye-protection.pngEye Care, No Bluelight
      • EnvironmentBulb.pngAmbient Light Required
      • Display TypeReflective.pngPassively Reflective
      Features At A Glance
      • Advanced Color ePaper (ACeP) technology, supports 7-Color display
      • No backlight, keeps displaying last content for a long time even when power down
      • Ultra low power consumption, basically power is only required for refreshing
      • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
      • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
      • Onboard voltage translator, compatible with 3.3V / 5V MCUs
      • Comes with development resources and manual (driver board schematic diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
      Specifications
      OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR ACeP 7-Color
      INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
      OUTLINE DIMENSIONS 98.50 × 70.00mm FULL REFRESH TIME 15s
      DISPLAY SIZE 86.40 × 54.00mm REFRESH POWER 50mW(typ.)
      DOT PITCH 0.135 × 0.135mm STANDBY CURRENT <0.01uA (almost none)
      RESOLUTION 640 × 400 pixels VIEWING ANGLE >170°
      Advantages Of EINK

      E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 
      E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

      Standard Raspberry Pi 40PIN GPIO Header

      Compatible With Raspberry Pi Series Boards, Jetson Nano

      4.01inch-e-Paper-HAT-F-details-3.jpg
      Onboard SPI Control Interface

      For Use With Other Controller Boards Like STM32/Arduino

      4.01inch-e-Paper-HAT-F-details-5.jpg
      VCC 3.3V/5V
      GND Ground
      DIN SPI MOSI pin
      CLK SPI SCK pin
      CS SPI chip selection, low active
      DC Data / Command selection (high for data, low for command)
      RST External reset, low active
      BUSY Busy status output
      Onboard Voltage Translator

      Compatible With 3.3V/5V MCUs

      4.01inch-e-Paper-HAT-F-details-7.jpg
      Application Examples

      Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

      Outline Dimensions
      4.01inch-e-Paper-HAT-F-details-size.jpg
      Resources & Services
      res_banner.png

      Package Content

      1. 4.01inch e-Paper (F) x1
      2. RPi screws pack (5pcs) x1
      3. PH2.0 20cm 8Pin x1
      14.01inch-e-Paper-HAT-F-3_220.jpg
      2M2.5x18-screws-hexa-5pcs.jpg
      3PH2.0-wire-20cm-8PIN_93.jpg
      Waveshare Electronics
      WS-19283

      Špecifické referencie

      4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels (WS-19283)

      65,88 €

      54.90 € bez DPH