SparkFun gator:bit BBC  (SF-DEV-14484)
      SparkFun gator:bit BBC  (SF-DEV-14484)

      SparkFun gator:bit BBC (SF-DEV-14484)

      SF-DEV-14484 (KIT-46131)
      26,28 €

      21.90 € bez DPH

      SparkFun gator:bit BBC  (SF-DEV-14484)

      Množstvo:
      OUT OF STOCK

      SparkFun gator:bit BBC  (SF-DEV-14484)

      Description

      The SparkFun gator:bit is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads that alligator (or crocodile, if you prefer) clips so you can get the most out of it! Whether it is data visualization using the five on-board addressable LEDs, capacitive touch sensing on pins 0, 1, & 2, or creating musical works of art using the built-in speaker we’ve got it covered with the with the SparkFun gator:bit!

      The major benefit of gator:bit that we have provided is safe access to as many GPIO as possible from the micro:bit. Not only are pins 0, 1, 2, 8, 16, 5 (Button A), and 11 (Button B) broken out, but they are also protected against over voltage and over current/short circuit. Pins 0, 1, and 2 are ADC pins and are also the capacitive touch pins. Pins 8, 16, 5, and 11 are digital pins capable of read and write. Additionally, pins 13 (SPI), 14(SPI), 15(SPI), 19 (I2C), and 20 (I2C) can be used to read and write whatever digital signals you could want. We go into much more detail about each pin and other attributes (like supplying voltage out, light, and sound) in the SparkFun gator:bit Guide found below. Make sure to check that out!

      Each SparkFun gator:bit can be powered from 2.7V - 9V giving you quite a range of powering options. There are two ways of powering your gator:bit, either from the JST battery terminal or the alligator clip pads labeled “VIN”. Any voltage input between 2.7V and 9V will be regulated to 3.3V to power the micro:bit, the speaker, and for use by any of the alligator clip pins.

      Even without any external hardware the gator:bit is still an exploratory development board for micro:bit allowing the easiest access to it for educators, beginners, and pro-makers alike.


      The micro:bit is a pocket-sized computer that lets you get creative with digital technology. Between the micro:bit and our shield-like bit boards you can do almost anything while coding, customizing and controlling your micro:bit from almost anywhere! You can use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of a credit card, this versatile board has vast potential!


      Note: The SparkFun gator:bit does NOT include a micro:bit board. The micro:bit will need to be purchased separately.

      GET STARTED WITH THE SPARKFUN GATOR:BIT GUIDE

      Features

      • micro:bit card edge connector
      • Input voltage: 2.7V - 9V
      • 5 built in addressable LEDs
      • Built in buzzer
      • 5V output
      • 3.3V output
      • 7 protected input/output pins
      • 3 pins for SPI communication
      • 2 pins for I2C

      Documents

      SparkFun
      SF-DEV-14484 (KIT-46131)

      Špecifické referencie

      upc
      46131
      SparkFun gator:bit BBC  (SF-DEV-14484)

      SparkFun gator:bit BBC (SF-DEV-14484)

      26,28 €

      21.90 € bez DPH