Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4
      Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4
      Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4

      Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4

      HK-FAN-XU4

      Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4

      Množstvo:

      Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4

      The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan.

      • Power : 5Volt / 120mA(max)
      • Dimension : 39.5 x 40.0 x 10.0 mm
      • Fan speed : 4000rpm approx.
      • Cable length : 50mm approx.
      • Noise Level : 23dBA approx.
      • Blue anodizing surface
      • Package includes a thermal paste tube. The thermal paste is responsible for conducting heat from the processor to the heat sink. Reassembling without applying thermal paste will cause the processor to overheat.


      PWM port on ODROID-XU4 2pin header which connector is Molex 51021-0200 / 1.25mm pitch.
      The fan motor speed is controlled by CPU temperature proportionally.

      Cautions : Minimize stress/bending to the PCB when you mount/un-mount the cooler

      Installation Guide : https://wiki.odroid.com/accessory/howto_install_heatsink_xu4

      • Step 1 : Remove the stock cooling fan
      • Step 2 : Clear the surface of the CPU and cooling fan
      • Step 3 : Apply the thermal paste on the CPU surface. Make sure to cover the entire surface that will mate to the cooler. 
      • Step 4 : Install the new cooling fan


      395x400x10blueheatsink1.jpg

      Hardkernel
      HK-FAN-XU4

      Špecifické referencie

      Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4

      Cooling Fan XU4 Blue (Hardkernel) G146727436639 for ODROID-XU4