SparkFun Pro Micro - RP2040  (SF-DEV-18288)
      SparkFun Pro Micro - RP2040  (SF-DEV-18288)
      SparkFun Pro Micro - RP2040  (SF-DEV-18288)

      SparkFun Pro Micro - RP2040 (SF-DEV-18288)

      SF-DEV-18288
      21,48 €

      17.90 € bez DPH

      SparkFun Pro Micro - RP2040  (SF-DEV-18288)

      Množstvo:
      OUT OF STOCK

      SparkFun Pro Micro - RP2040  (SF-DEV-18288)

      The SparkFun Pro Micro RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the good 'ol Pro Micro footprint, the board also includes a WS2812B addressable LED, boot button, reset button, Qwiic connector, USB-C, resettable PTC fuse, and castellated pads.

      The RP2040 utilizes dual ARM Cortex-M0+ processors (up to 133MHz) and features:

      • 264kB of embedded SRAM in six banks
      • Six dedicated IO for SPI Flash (supporting XIP)
      • 30 multifunction GPIO
        • Dedicated hardware for commonly used peripherals
        • Programmable IO for extended peripheral support
        • Four channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
      • USB 1.1 Host/Device

      The RP2040 is supported with both C/C++ and MicroPython cross-platform development environments, including easy access to runtime debugging. It has UF2 boot and floating-point routines baked into the chip. The built-in USB can act as both device and host. It has two symmetric cores and high internal bandwidth, making it useful for signal processing and video. While the chip has a large amount of internal RAM, the board includes an additional 16MB external QSPI flash chip to store program code.

      RP2040 General Features

      • Dual Cortex M0+ processors, up to 133 MHz
      • 264 kB of embedded SRAM in 6 banks
      • 6 dedicated IO for QSPI flash, supporting execute in place (XIP)
      • 30 programmable IO for extended peripheral support
      • SWD interface
      • Timer with 4 alarms
      • Real time counter (RTC)
      • USB 1.1 Host/Device functionality
      • Supported programming languages
        • MicroPython
        • C/C++

      SparkFun Pro Micro - RP2040 Features

      • Raspberry Pi Foundation's RP2040 microcontroller
      • AP2112 3.3V voltage regulator
      • Support programming languages
        • MicroPython
        • C/C++
      • On-board USB-C connector for programming
        • USB 1.1 Host/Device functionality
      • Built-in Resettable PTC Fuse
      • PTH pads w/ castellated edges
      • 20x multifunctional GPIO Pins [1]
        • 4x 12-bit ADC channels with internal temperature sensor, 0.5 MSa/s, 12-bit
        • 10x PWM channels
        • Serial Peripherals
          • 2x UARTs
          • 1x I2C (Qwiic enabled)
          • 1x SPI
      • Buttons
        • Boot
        • Reset
      • LEDs
        • Power
        • WS2812 Addressable LED
      • 16MB External Flash Memory
      • Dimensions: 1.3in x 0.7in

      Documents

      SparkFun
      SF-DEV-18288

      Špecifické referencie

      SparkFun Pro Micro - RP2040 (SF-DEV-18288)

      21,48 €

      17.90 € bez DPH