Raspberry Pi Debug Probe (SC0889) debug solution for ARM-based microcontrollers, powered by RP2040

Raspberry Pi Original USB Debug Probe, Hardware Debug Kit Designed For Pico, Based On RP2040 Microcontroller, With Transparent Plastic Case

Raspberry Pi USB Debug Probe

Official Raspberry Pi hardware debug kit designed for Pico

Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi

Board Specifications

Raspberry Pi Debug Probe is an official USB hardware debugger designed for Pico, all-in-one design, with the features of solderless and plug-and-play, can be connected to the debug interface of the target board via SWD interface.

Key features include:

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Onboard Micro-USB port for connecting to PC or other motherboards
• Onboard 3PIN SWD interface for connecting to the target board
• Onboard 3PIN USB to UART bridge
• Standard CMSIS-DAP interface, compatible with most ARM-based microcontrollers
• Works with OpenOCD and other tools supporting CMSIS-DAP
• Follows the Raspberry Pi 3PIN Debug Connector Specification
• Comes with high-quality transparent plastic case and connection cables
• Open source programs, more convenient to upgrade the firmware

Connection Example

Onboard Resources

Product Show

Outline Dimensions

Resources & Services

Wiki: www.waveshare.com/wiki/Raspberry_Pi_Debug_Probe

A complete debug hardware solution for Arm-based microcontrollers, powered by RP2040. Featuring a USB to two-wire serial debug bridge and a USB to UART bridge, the Debug Probe makes it easy to use devices such as Raspberry Pi Pico with a range of host platforms including PC, Mac, and typical Linux computers.

The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging.It features both a processor serial debug interface (by default the Arm Serial Wire Debug interface, but other interfaces can be supported) and an industry-standard UART interface. Both interfaces use the Raspberry Pi 3-pin debug connector, as detailed in the Raspberry Pi 3-pin Debug Connector Specification.The Raspberry Pi Debug Probe is a kit comprising the Debug Probe hardware in its own plastic case together with a USB cable and three types of debug cable, covering the vast majority of debug use cases. It is designed to make it easy to debug and program Raspberry Pi Pico and RP2040 with a range of host platforms including Windows, Mac, and typical Linux computers, where you don’t have a GPIO header to connect directly to the Pico’s serial UART or SWD port.While designed for use with Raspberry Pi products, the Debug Probe provides standard UART and CMSIS-DAP interfaces over USB, so it can also be used to debug any Arm-based microcontroller that provides an SWD port with 3V3 I/O, or even just as a USB-to-UART cable. It works with OpenOCD and other tools that support CMSIS-DAP.The Debug Probe is based on Raspberry Pi Pico hardware and runs the open source Raspberry Pi Picoprobe software. The firmware is updated in the same way as Raspberry Pi Pico firmware, so it is easy to keep the unit up to date with the latest firmware, or to use custom firmware.

Specification

• Form factor: 22mm × 32mm
• USB to two-wire serial debug bridge (Arm Serial Wire Debug supported by default)
• USB to UART bridge
• Compatible with the CMSIS-DAP standard
• Works with OpenOCD and other tools supporting CMSIS-DAP
• Follows the Raspberry Pi 3-pin Debug Connector Specification
• Includes a high-quality transparent plastic case
• Includes a USB cable and three debug cables: 3-pin JST connector to 3-pin JST connector cable; 3-pin JST connector to 0.1-inch header (female); 3-pin JST connector to 0.1-inch header (male)
• Nominal I/O voltage: 3.3V

Kit includes

• Raspberry Pi Debug Probe with case
• Debugger cable
• Goldpin adapter
• microUSB cable

Documents

• Raspberry Pi Debug Probe product brief
• Raspberry Pi Debug Probe documentation