The Raspberry Pi is a great low cost computer with thousands of different uses but one thing it does not come with is a real-time clock.  This means that every time you switch off your Raspberry Pi it forgets what the time is and you have to manually set it again next time you switch your Raspberry Pi on.

The RTC Pi Plus is a battery backed real-time clock module for the Raspberry Pi. It keeps track of the time while the Raspberry Pi is switched off and allows the Raspberry Pi to retrieve the current date and time from the RTC Pi Plus  when it is switched back on.

Introduction:

The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the RTC Pi Plus along with other expansion boards. The RTC Pi Plus uses the DS1307 RTC real time clock and a CR2032 battery to maintain the date and time when the main system power is not available.

Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.

The RTC Pi Plus is very useful for standalone projects where your Raspberry Pi will not have a network connection and therefore no way to retrieve the current date and time from the internet.

Mounting holes are provided so you can securely bolt the RTC Pi Plus to your Raspberry Pi with our mounting kit (sold separately).

The RTC Pi Plus can also be used on Arduino boards when connected via the I2C bus.

The i2c address for the DS1307 RTC is 0x68. If you use this board along side the ADC Pi or DeltaSigma Pi boards you will need to change the i2C address on those boards.

Warning: Do not connect the RTC Pi Plus to your Raspberry Pi when the power is connected without a CR2032 battery installed. This can cause damage to the DS1307 RTC chip.

The RTC Pi Plus uses a CR2032 button battery (battery not included).

Compatibility Chart

Model	Status
Raspberry Pi Model A	No
Raspberry Pi Model B	No
Raspberry Pi 1 Model A+	Yes
Raspberry Pi 1 Model B+	Yes
Raspberry Pi 2 Model B	Yes
Raspberry Pi 3 Model B	Yes
Raspberry Pi Zero	Yes
Raspberry Pi Zero W	Yes
ODroid C1	Yes
ODroid C2	Yes
Orange Pi	Yes
Asus Tinker Board	Yes

Schematic

Click to download schematic PDF.

Assembly Instructions

The RTC Pi Plus is supplied with the 40 pin GPIO connector and the battery holder unsoldered. 

Before using the RTC Pi Plus you will need to solder both connectors onto the PCB.  We suggest soldering the 40 pin GPIO connector first and then the battery holder. Please install the battery holder following the outline on the circuit board. 

Watch the assembly video, best viewed in 1080p high quality mode:

PCB Header Assembly Jig

Download and print our PCB Header Assembly Jig to hold your circuit board when soldering the header pins.

Mechanical Drawings

Click image to enlarge

 

How to set and read the time

Follow our tutorial on how to enable I2C on your Raspberry Pi and set up the real time clock on the RTC Pi.

Code Libraries and Demos

We have Python, Arduino, C, C++, Node.js and Windows 10 IOT libraries available for this expansion board.  You can download all of the libraries from github at:

https://github.com/abelectronicsuk/ or click on the logos below for your selected programming language,

 

 

Tutorials

RTC Pi and Arduino

RTC Pi and Beaglebone Black

RTC Pi and the Raspberry Pi