Raspberry Pi Model A+ 512MB RAM - RASPBRRY-MODA+-512M (2447906)

• More Energy Efficiency (Less Power Required)
• Improved Power Management: Manage More Devices from Your Pi!
• Bigger and Better projects via an Expanded GPIO Header (40 pins vs. 26)
• NEW Micro SD Card port protects your SD card from damage
• RS 833-2699 (8332699)

The Raspberry Pi Model A+ is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the model B+, but does away with the Ethernet jack and three of the USB Ports. This makes it lower power, less expensive and much lighter & smaller! It's still compatible with all Pi operating systems and software, and has the exact same 40 pin GPIO connector and camera/display sockets, so any HATs or Pi Plates or other things that plug into the model B+ will work just the same. 

It also has the same HDMI, sound/composite connector and microUSB connector for power

Unlike the Raspberry Model B+, there's only one USB port and no ethernet jack but it's also significantly smaller at 65mm x 56mm if you don't include overhang from the connectors.

Don't forget, you'll need a USB power supply with microUSB cable, and a microSD card with a Raspberry Pi OS on it (we suggest a Raspbian 4G card or NooBS 8G card)

• Dimensions: 65mm x 56mm / 2.5" x 2.25"
• Processor: ARM 700Mhz CPU
• USB: One USB 2.0 Port - Keeping it compact means minifying the footprint as much as possible
• Video Output: HDMI and Composite
• Sound: L/R Stereo (via 3.5mm 4 Pole Cable)
• Memory: 512MB Ram
• Operating System: Uses microSD card slot to load O/S
• Digital interfaces: 2 onboard ribbon slots for Camera and Display
• GPIO: 40 GPIO pins, backwards compatible to B board
• No Ethernet jack
• http://en.wikipedia.org/wiki/Raspberry_Pi

Like the Model A, the Model A+ uses the BCM2835 application processor and has 512MB RAM, but it is significantly smaller (65mm in length, versus 86mm for the Model A), consumes less power, and inherits the many improvements that we made to the Model B+, including:

• More GPIO. The GPIO header has grown to 40 pins. The Model A+ is compatible with the HAT standard for add-on boards.
• Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
• Better audio. The audio circuit incorporates a dedicated low-noise power supply.

	Model B+	Model B	Model A+	Model A	Compute Module Dev Kit
Chip	Broadcom BCM2835 SoC full HD multimedia applications processor	Broadcom BCM2835 SoC full HD multimedia applications processor	Broadcom BCM2835 SoC full HD multimedia applications processor	Broadcom BCM2835 SoC full HD multimedia applications processor	Broadcom BCM2835 SoC full HD multimedia applications processor
RAM	512 MB SDRAM @ 400 MHz	512 MB SDRAM @ 400 MHz	512 MB SDRAM @ 400 MHz	256 MB SDRAM @ 400 MHz	512 MB SDRAM @ 400 MHz
Storage	MicroSD	SDCard	MicroSD	SDCard	4gB eMMC
USB 2.0	4x USB Ports	2x USB Ports	1x USB Port	1x USB Port	1x USB Port
Power Draw / voltage	600mA up to 1.8A @ 5V	750mA up to 1.2A @ 5V	600mA up to 1.8A @ 5V	600mA up to 1.2A @ 5V	600mA up to 1.8A @ 5V
GPIO	40	26	40	26	120
Ethernet Port	Yes	Yes	No	No	No