Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F
      Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F
      Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F

      Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F

      ER-DTE00413H
      15,48 €

      12.90 € bez DPH

      Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F

      Množstvo:
      OUT OF STOCK

      Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F

      Description

      Another development board for ESP8266-12F. But this one is a bit different, made to be easy to set up without the need for additional hardware like programmers and voltage regulators. A wide voltage range switching regulator enables the user to use different battery technologies from 1 AA cell up to LiPo cells. If you are using LiPo cells there is also a USB charger on the board. The ADC is connected to the battery with a voltage divider that you can turn off when not used to save power.
      The board has been made as small as possible but still with a lot of functions and breadboard compatible.

      Features

      • Optimized for ultra low power and ease of use.
      • One of the smallest devboard for ESP8266.
      • Measure battery voltage through voltage divider with zero poweruse when not measuring.
      • All pins except G15, Reset and Chip Enable exposed on the pinheader to the user.
      • CP2104 usb to uart with auto-reset support for getting into bootload mode before firmware upload.
      • LiPo charging from USB.
      • Wide range supply voltage to work with many different battery configuration.
      • Exposed setting pins for TSP61201.
      • Deep sleep prewired, only need to connect with a solder jumper.
      • Breadboard compatible.

      Specifications

      • ESP8266-12F
      • Micro-usb for power and uploading of code.
      • Battery voltage: 0.8-5.5V or USB powered.
      • TPS61201 3.3V boost converter with built in LDO for >3.3V capability.
      • LiPo charge current: 500mA (setable with change of resistor)
      • ADC: 0-5V with voltage divider.
      • Size: (LxW) 27 x 24 mm

      Package list

      • Homefixer ESP8266 devboard x 1

      Wiki & External links

      ELECROW
      ER-DTE00413H

      Špecifické referencie

      Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F

      Homefixer ESP8266 devboard (ER-DTE00413H) development board for ESP8266-12F

      15,48 €

      12.90 € bez DPH