CP2102 EVAL BOARD (Waveshare 574) USB, RS232, DB9 Connector

Overview

The CP2102 EVAL BOARD is an evaluation board designed for CP2102, integrates MAX3232/SP3232, USB connector, DB9 connector onboard.

CP2102 features:

• Single-Chip USB to UART Data Transfer
  • No external resistors required, no external crystal required
  • On-chip power-on reset circuit and voltage regulator
  • Integrated 1024-Byte EEPROM
• USB Function Controller
  • USB Specification 2.0 compliant; full-speed (12 Mbps)
  • USB suspend states supported via SUSPEND pins
• UART
  • All handshaking and modem interface signals
  • Data formats supported:
    • Data bits: 5, 6, 7, and 8
    • Stop bits: 1, 1.5, and 2
    • Parity: odd, even, no parity
  • Baud rates: 300 bps to 1 Mbits
  • 576 Byte receive buffer; 640 byte transmit buffer
  • Hardware or X-On/X-Off handshaking supported
  • Event character support
• Virtual COM Port Device Drivers
  • Windows 8/7/Vista/Server 2003/XP/2000
  • MAC OS-X/OS-9
  • Linux 2.40 or higher
• USBXpress Direct Driver Support
  • Windows 7/Vista/Server 2003/XP/2000
  • Windows CE
• Temperature Range
  • –40 to +85 °C

Features

• Supports Windows 8
• A complete solution for USB TO COM
• Also used as USB TO TTL (disconnect the RXDJMP, TXDJMP, and no RS232 device to be connected)

How to Use

In the case of working with a MCU:

• VCC: 5V output
• GND: connects to GND
• TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
• RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
• RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
• CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)

Note: VCP examples and USBXpress driver program library are provided.

Photos

Downloads

Development resources:user manual, schematic, datasheets, software, etc.

Wiki: www.waveshare.com/wiki/CP2102_EVAL_BOARD

PACKAGE CONTENT :

1. CP2102 EVAL BOARD × 1
2. USB Cable × 1
3. Serial Male to Female Cable × 1
4. 4-pin wire x 2
5. 2-pin wire x 2